A pressure-holding valve is a type of valve used to control and stabilize the internal pressure of a system within a set range. Common issues and repair solutions are as follows:
Water or Air Leakage: If a pressure-holding valve experiences water or air leakage, it is usually caused by aging or damage to the sealing components. Solutions include replacing the sealing ring or the entire pressure-holding valve.
Unstable Pressure: If the output pressure of the pressure-holding valve is unstable or fluctuates significantly, it may be due to damaged or obstructed internal parts. In this case, attempting to clean the interior of the valve or replace the damaged parts may help.
Failure to Close or Open: If the pressure-holding valve cannot close or open properly, it may be caused by a stuck or damaged valve core. Solutions include cleaning the valve core, replacing the valve core, or the entire pressure-holding valve.
Excessive Noise: If the pressure-holding valve makes abnormal noise during operation, it may be due to mismatch between the valve core and valve seat or wear. This can be resolved by readjusting the position of the valve core or replacing both the valve core and valve seat.
Inaccurate Pressure Adjustment: If the pressure adjustment of the pressure-holding valve is inaccurate, it may be due to a loose adjusting nut or a failed internal spring. Repair options include readjusting the nut or replacing the spring.
It should be noted that for the repair and maintenance of pressure-holding valves, it is recommended to have the work carried out by professional technicians to ensure safety and reliability. Before repairing a pressure-holding valve, consult the device's manual or the manufacturer for the correct repair plan and operating procedures. If the issue cannot be resolved independently, it is recommended to contact professional repair personnel promptly for assistance.
EN
